Structural Pole Systems

Round Straight Steel
Embedded Pole

Product Code: RSSE

One-piece hot-rolled welded steel construction engineered for direct burial in concrete. Features a removable dome cap with pre-drilled openings on two sides — each sealed with rubber plugs when not in use. Designed for through-bolt luminaire arm attachment without a slip-fitter tenon. Factory-applied below-grade asphaltum coating and wire access slots are included standard.

Direct Burial Pre-Drilled Two Sides 55 KSI Steel Asphaltum Below-Grade
RSSE Round Straight Steel Embedded Pole with dome cap, pre-drilled two sides, and below-grade asphaltum coating
Engineering & Construction

Key Features

Dome Cap — Pre-Drilled Two Sides

Removable dome pole cap with rectangular pre-drilled openings on two opposite sides of the pole top. Each opening is fitted with a rubber plug for a weather-tight finish when unused. Openings accommodate through-bolt luminaire arm hardware without a tenon or slip-fitter.

Direct Burial Installation

RSSE poles are set directly in a concrete foundation — no anchor bolts, no base plate, no template required. Simplifies installation and reduces material cost for residential and light commercial applications.

Below-Grade Asphaltum Coating

Factory-applied asphaltum coating on the embedded section protects the steel from soil moisture, corrosive soils, and groundwater. The above-grade to below-grade transition is clearly marked on every pole.

Wire Access Slots

Oval wire access slots on the embedded section allow conduit and wiring to enter the pole below grade. Eliminates surface-mounted conduit runs and maintains a clean above-grade appearance.

Hand Hole with Locking Bar

3\u{2033} \u{00D7} 5\u{2033} hand hole at 18\u{2033} above finished grade on side A. Includes a matching cover plate with a locking bar for tamper resistance and an integrated grounding lug on every pole.

Powder-Coat over Galvanization

Above-grade dual-layer corrosion protection: hot-dip galvanization base plus exterior powder coat. Standard colors: Black, Dark Bronze, Silver Gray, White. Premium: Pine Green, Corten Brown.

Engineering Data

Technical Specifications

Structural Data

Specification Value
Construction Hot-rolled welded steel, one-piece
Shaft Yield Strength 55 KSI Minimum
Installation Method Direct burial in concrete (no anchor bolts)
Top Configuration Removable dome cap, pre-drilled two sides
Pre-Drilled Hole Size [PDF] — verify from spec sheet
Plugs Rubber plugs, factory-installed, included
Shaft Diameter [PDF] — verify from spec sheet
Wall Thickness [PDF] — verify from spec sheet
Overall Length [PDF] — verify from spec sheet
Above-Grade Height [PDF] — verify from spec sheet
Embed Depth (below grade) [PDF] — verify from spec sheet
Below-Grade Coating Factory-applied asphaltum
Wire Access Slots [PDF] — verify dimensions from spec sheet
Hand Hole Dimension 3″ × 5″ at 18″ above grade
Above-Grade Finish Powder-coat over galvanization
Standard Colors Black, Dark Bronze, Silver Gray, White
Premium Colors Pine Green, Corten Brown
Structural Warranty 5 Years
Finish Warranty 3 Years

Wind Load Ratings — ASCE 7-05 (EPA ft²)

Catalog No. Weight 90 MPH 100 MPH 110 MPH
[PDF] RSSE-—— [PDF] [PDF] [PDF] [PDF]
[PDF] RSSE-—— [PDF] [PDF] [PDF] [PDF]
[PDF] RSSE-—— [PDF] [PDF] [PDF] [PDF]
[PDF] RSSE-—— [PDF] [PDF] [PDF] [PDF]
[PDF] RSSE-—— [PDF] [PDF] [PDF] [PDF]

EPA values per AASHTO 2013 / ASCE 7-05 for side-mounted fixtures only. Full Florida (FBC 2023 / ASCE 7-10) wind ratings and 120–140 MPH columns are included in the downloadable spec sheet. Consult factory for bracket arm or luminaire through-bolt loading criteria.

Where It’s Used

Applications

Streetscapes

Residential Sites

Commercial Exteriors

Parks

Pathways

Municipal Lighting

Specification Resources

Downloads

Download the complete RSSE specification sheet for full engineering data, ordering matrices, wind load tables, embed depth schedules, and installation guidelines.

Work With LUXFORM

Need help specifying this product
for your project?

Our team is ready to support you — from initial specification to final installation. Contact us for custom configurations, project quotes, photometric data, or additional technical documentation.